DIRECTIONS FOR USE:
When using on painted surfaces, test a small area to be sure paint is not affected. Hold can eight to ten inches
from the surface to be sprayed. Apply a thorough coating, being sure to cover all grease, oil or tar.
FOR ENGINES: Cover carburetor intake and distributor with plastic or aluminum foil before using to avoid water contamination. Allow product to set for fifteen minutes to allow complete penetration and emulsification. Hose off with strong stream of water. Remove plastic or aluminum foil and run engine for fifteen minutes to insure complete drying.
OTHER SURFACES: To remove oil, grease, tar and asphalt from other surfaces, apply to surface covering area to be cleaned completely. Allow product to work for ten to fifteen minutes. Wash off with a strong stream of water. Heavily soiled areas may require scrubbing or a second application.
